.

When you need a cam for higher performance and high rpm use, then a Herbert solid lifter cam is what you need. Ideal grinds for street-strip, drag or oval track. If you need assistance picking out a cam please call our tech line at (704)732-2400.

Great torque, top end power. Fast acceleration. Comp. needed. 3500+ stall.

RPM Range: 3500-7500Advertised Duration: 320/320Duration @ .050: 272/272Lift: .600/.600Lash-Lobe Center: .026-108c

Perfect for street performance, street-strip or pro-street. These cams offer the power and torque increases that are available only with roller cams, plus the low maintenance of a hydraulic cam. If you need more assistance picking out a cam please call our tech line at (704)732-2400.

ATTENTION!!
IMPORTANT WARRANTY INFORMATION ON ALL HERBERT FLAT TAPPET CAMS.

Due to changes in the current oil available the following changes are necessary in regards to warranty on flat tappet (Solid or Hydraulic) camshafts.

For ANY warranty claim to be valid the following HERBERT parts must be purchased and used at the time of camshaft installation.

New Herbert lifters

Herbert cam break in lube part# EF301, Comp Cams # 159or Red Line #81403

New Herbert valve springs matched to the cam per our catalog requirements

Street cams (less that .500 lift, and less than .550 lift on big blocks) are warranted for a period of 1 year from date of purchase with proof of purchase and required installation parts. Race flat tappet cams (more that .500 lift on small blocks & more than .550 lift on big blocks) only carry a warranty to be free from defects in materials and workmanship, they do NOT carry any guarantee against wear due to the extreme usage of racing.

If you follow the proper installation instructions your new Chet Herbert cam will give you the type of performance that has won races and made us leaders in valve train innovation since 1949.

Sincerely,
Herbert Tech Department