.

It was 1949 when the first roller cam was manufactured for the performance automotive engine, and it was Chet Herbert Cams who designed and ground it. Since then Chet Herbert Cams has been the leader in roller cams. Today?s rollers feature faster ramp speed and higher lifts for the ultimate in power. Herbert roller cams are manufactured from the finest 8620 steel billet alloy steel bar stock. We?ve designed and produced cams for drag racing, oval track, road racing, boat racing, truck and tractor pulling, mud racing and even Bonneville land speed racing. Don?t let the sticker on the side of the car fool you, many winning racers that run a Herbert Cam don?t run a Herbert Cam sticker. The following grinds are just some of our most popular racing profiles. Please see our master list in our free catalog or call for more assistance, tech line at (704)732-2400.

Rough idle, mid and upper horsepower/torque, bracket racing w/race converter

RPM Range: 3500-7500Advertised Duration: 299/308Duration @ .050: 261/270Lift: .714/.710Lobe Center: 108c

Perfect for street performance, street-strip or pro-street. These cams offer the power and torque increases that are available only with roller cams, plus the low maintenance of a hydraulic cam. If you need more assistance picking out a cam please call our tech line at (704)732-2400.